INTRODUCTION

Now that you know how to properly strip wires, you'll learn how to properly attach them to a component. When a component is not attached properly, it may result in a short to ground. A short to ground can lead to a component not receiving power, at best, or even injury, at worst. So learning to attach wires properly will help prevent injury.

#

OBJECTIVES

Learn how to attach (land) a wire properly and safely

#

VIDEO

Please watch the following video. This video will go over the proper way to connect and land your wires to your connections. You will use this information in the next lab.

#

HOW TO SUCCEED

When mounting Solid wires, be sure that little to no copper is exposed and that the terminal screw is snug but not overly tight. Give it a small tug to check.
When mounting a stranded copper wire, don't just cram it in. (See image.) A poorly landed stranded wire can cause shorts and other unwanted function.
When landing a stranded copper wire, be sure to twist the stands together and ensure that all the strands are straight.
A properly landed stranded wire will have all the strands together in the terminal with no strands sticking out. A neat connection is a good connection.